摘 要：交流接觸器是電力系統和自動化控制系統中不可缺少的量大面廣的低壓電器。但是傳統接觸器功能單一、耗電多、噪音大、觸頭容易燒毀、壽命短。隨著科學技術的飛速發展，電力網和其他控制系統和保護電路對交流接觸器的性能要求日益提高，希望設計制造出體積小、重量輕、壽命高、精度和可靠性高、節能、可通信、價格合理的交流接觸器。本課題的研究具重要的經濟意義和社會的應用價值。本文主要介紹了智能接觸器數據采集模塊的設計，開關量、模擬量信號的采集. Abstract：AC contactor is widely used in power system and automatic control system. But unfortunately, traditional contactors consume too much energy, make big noises and have short lives. And usually a contactor just has one single function.With the development of science, high requests are brought forward in power system and control systems. Contactors with higher performances are needed, including smaller dimensions, lighter weights, higher precision, higher reliabilities and communication services. This research has significant economic and social importance. This paper is about data collection modular of intelligent AC contactor. 關鍵詞：智能接觸器;數據采集;傳感器 Keywords：intelligent AC contactor; data collection; sensor 1.前言 　　電器智能化是現代科學技術與傳統電器技術相結合的產物。它融合了傳統電器、計算機與數字控制、微電子技術、電力電子技術、計算機通信與網絡及現代傳感器技術等各門類的學科。智能電器具有自動監控和識別故障類型及操作命令類型的功能，能根據故障和操作命令類別來控制電器元件操作機構動作。對現場參量精確、快速的采集是智能電器做出正確判斷的基礎。但是一般情況下，現場參量是高電壓、大電流的參數。對于5V或是3.3V的控制系統來說，技術上要做處理。本文提出了對高電壓大電流的電參數的采集方法。 2.智能接觸器功能分析 　　智能接觸器的主要任務是采集三相交流電流、三相交流電壓及電機溫度，對電機進行過載保護和欠壓、過壓、缺相等保護。智能接觸器有外接鍵盤和顯示器，并能與上位機通信。根據以上分析 ，可將設計任務分為三部分：現場參量及檢測;監控單元的設計;通信。 詳情請點擊：智能交流接觸器數據采集模塊的研究