2008年1月7日消息，美國國家儀器（NI）宣布推出該公司的第一款USB控制的RMS RF功率儀表，此儀表可提供小體積的用于自動化測試、測量和監督應用的靈活性解決方案。6 GHz NI USB-5680功率儀表以高測量精確性和寬泛的動態包裝特征展現在用戶面前，并且不占用很大的空間。其動力供應僅來自于USB線纜，新功率儀表也是便攜式應用的理想選擇，因?yàn)槠鋬H用100 mA電流，不用再提供額外的電源。 傳統的功率儀表以功率傳感器或?qū)Ь€定位接近測試中的單元，及通過纜線連接位于傳統儀表包裝中精確的A/D轉換器。利用最新的PC和A/D轉換器技術，USB-5680在一個體積小于9.6立方英尺的包裝中將兩者結合起來，比具有同等效果的benchtop體積要小。USB-5680可直接且簡易地在任何PC或PXI控制器上與USB接口相連接。 由于頻率比較寬，高動態范圍和測量的精確性，工程師們可以利用USB-5680 RMS功率儀表進行廣泛的應用。 特點： 頻率范圍廣：50 MHz 到6 GHz 體積?。?.5 X 3.0 X 5.6 cm （3.35 X 1.18 X 2.2英寸） 高動態范圍：63 dB 振幅精確性：±0.18 dB 為實現全部?jī)x表的性能，USB-5680結合執行軟面板和直觀的軟件庫幫助工程師快速安裝他們的系統。需要測試連續的高達6Hz RF信號波的工程師可利用配有VXIplug&play兼容執行軟件面板的卓越配置以促進交互式控制。在自動化測試和測量系統中結合USB-5680，工程師們可以應用簡單的應用程序編程接口（API），結合NI的LabVIEW, LabWindows™/CVI和微軟NET環境進行編程。 [FONT=times] original text [/FONT] [font=times][Color=#708090]NEWS RELEASE – Jan. 7, 2008 – National Instruments today announced the company’s first USB-controlled true RMS RF power meter, which provides a highly flexible solution for automated test, measurement and monitoring applications in a small footprint. The 6 GHz NI USB-5680 power meter features high measurement accuracy and wide dynamic range packaged in a size similar to a typical power head. In automated test applications, the small size frees up valuable rack space without sacrificing performance. Powered solely from the USB cable, the new power meter is also ideal for portable applications because it consumes only 100 mA of current without an external power supply. Traditional power meters feature a power sensor or head located close to the unit under test and connect via cable to an accurate A/D converter located in conventional instrumentation housing. Using the latest PC and A/D converter technologies, the USB-5680 combines both the sensor and the A/D converter in one package occupying less than 9.6 cubic inches – much smaller than the benchtop equivalent. The USB-5680 simply connects directly to an available USB port on any PC or PXI controller. With a broad frequency range, high dynamic range and precise measurement accuracy, engineers can use the USB-5680 true RMS power meter for a broad range of applications. Features include: • Small size: 8.5 by 3.0 by 5.6 cm （3.35 by 1.18 by 2.2in） • Wide frequency range: 50 MHz to 6 GHz • High dynamic range: 63 dB • Amplitude accuracy: ±0.18 dB To realize full instrumentation capabilities, the USB-5680 comes with a full-featured, executable soft front panel and intuitive, easy-to-use software libraries to help engineers quickly set up their systems. Engineers who need to measure continuous wave RF signals up to 6 GHz can use the USB-5680 in a stand-alone configuration with a VXIplug&play-compatible executable soft front panel to facilitate interactive control. To incorporate the USB-5680 in an automated test and measurement system, engineers simply use the intuitive application programming interface （API） with their programming environments of choice including NI LabVIEW, LabWindows™/CVI and the Microsoft .NET environment.[/color][/font]